Back

Digital Product Identity

How to Turn Product Interactions Into Actionable Customer Data

Thomas


03 Nov 2026

moving black circles

A fragrance owner taps the bottle cap for the first time. The brand learns the unit, the market and the moment, and confirms the item is genuine. Six months later the dashboard still shows a map of dots, and no team has changed a decision because of it. Product interactions become actionable customer data when a chain connects each tap to an action: a verified event, a consent, a named attribute and a CRM trigger.

Why do most connected product programmes produce scans but no decisions?

The signal is rarely the weak point. A tap carries a specific item, a real person holding it, a place and a moment. What is missing is the plumbing between that signal and a team that acts.

Four drivers recur:

  • No attribute rules. Events are stored, but nobody has defined what a pattern of events means for a customer.
  • One page for every moment. Purchase, use, gifting and resale all land on the same content, so there is little reason to tap twice.
  • Consent asked too early. Owners are asked for details before they have received anything.
  • Untrusted carriers. A copyable code produces interactions from counterfeits, and those pollute the customer record.

The distinction that matters: a scan nobody acts on is a cost. A scan that changes a decision is data.

What is product interaction data?

Product interaction data is the record created when someone reads a product’s digital identity and the brand logs the event against that unit. It is attached to an item first and to a person only if the owner opts in.

That difference shapes the whole design. Most interactions describe the product, not the individual.

Interaction What it tells the brand Data captured
First tap after purchase A real owner exists, in this market Unit, time, country, authenticity
Repeat taps The product is in use Frequency, content viewed
Registration The owner agrees to be known Consented contact, preferences
Ownership transfer The item changed hands Owner change, resale event
Opening (tamper-evident tag) The product was opened or consumed Opened status, date
Service scan The product is being maintained Service event, location
Failed verification Someone holds or suspects a fake Failed check, location

Only registration and transfer involve a known person. The other five are useful even if no owner ever shares a name.

How do you turn product interactions into customer data?

The process runs in seven steps, from the tap to the measured outcome.

  1. Interaction. Someone taps because the experience offers something they want at that moment.
  2. Verified event. The platform checks that the carrier is genuine and records the event against that unit.
  3. Context. The event is enriched with the unit’s model, batch, intended market and history, usually via the unit identifier (GTIN plus serial).
  4. Consent. If the owner opts in, the event can be linked to a person.
  5. Attribute. Rules convert event patterns into attributes such as active user, second owner or replenishment due.
  6. Trigger. Attribute changes start journeys in the CRM, or alerts for brand protection and distribution teams.
  7. Measurement. Each journey is traced back to the interaction that started it.

Most programmes break at step 5. They hold events but never define their meaning, so the CRM has nothing to react to.

What makes people tap a product more than once?

People tap when the product gives them something at that stage of ownership. Design one reason per stage, not one generic landing page.

Moment What the owner wants What to offer What the brand learns
Purchase Reassurance Authenticity result, origin First market of use
First use To get the most from it Serving, care or usage guidance Language, preferences
Ongoing use Refills, inspiration Routines, replenishment Usage rhythm
Gifting A meaningful gesture Personal message, certificate A new owner
Resale Proof for the buyer Verification, transfer Second owner, resale market
Service Care and value Booking, history Maintenance pattern

The experience has to load without an app. iPhone XS and XR and later read NFC tags in the background, and Android phones read them natively with the screen on. Every extra step between tap and value loses owners.

When should a brand ask for consent after a scan?

Ask when the owner receives something clearly worth more than their details. A scan alone identifies a unit, a time and an approximate place. Linking it to a person requires an opt-in.

Four offers tend to earn it:

  • A digital ownership certificate that protects resale value, in exchange for name and contact.
  • An extended warranty, in exchange for contact and proof of purchase.
  • Refill or replenishment reminders, in exchange for contact and timing preference.
  • Exclusive content or access, in exchange for contact and interests.

Keep consent progressive. The first tap works anonymously. Registration follows when the owner has a reason. Marketing permission is a separate choice. In Europe this sits under GDPR: clear notice, a specific purpose, and personal data kept apart from product events.

Which attributes should product events produce?

Define attributes once, in plain language, with a named owner for each. Raw events do not drive journeys. Attributes do.

Event pattern Attribute Possible action
First verified tap in a market Owner market Localised content and offers
Three or more taps in 30 days Active user Usage tips, loyalty invitation
Opened status after first tap Consumed / in use Replenishment journey
Ownership transferred Second owner Welcome and care journey
Registered owner, no tap for 12 months Dormant owner Service reminder, re-engagement
Failed verification Possible counterfeit victim Support journey, alert to brand protection
Genuine tap outside intended market Grey channel purchase Alert to commercial team

The thresholds in this table, such as three taps in 30 days, are starting points to calibrate against your own data.

A caution on the last row. The owner of a diverted product bought a genuine item and did nothing wrong. Give them the normal customer experience, and pass the signal to the team that manages distribution. Grey tracking shows how those scans become a diversion map.

Which journeys can product interactions trigger?

Each journey starts from a product signal, not a campaign calendar.

Replenishment. Opened status and tap frequency estimate when a bottle runs low. The brand makes a refill offer to a known owner before they buy elsewhere.

Second-owner welcome. An ownership transfer triggers a welcome, care guidance and a certificate. The CRM gains a customer it would never have found through retail data.

Counterfeit victim support. A failed check opens a support journey and sends brand protection the location. Trust is protected and enforcement gets evidence.

Service reminders. Registration date and last service event schedule a prompt. Watches and leather goods stay better kept, and hold value in resale.

Why does the carrier decide whether the data can be trusted?

Customer data is only as good as the carrier behind it. If a code can be copied, counterfeits generate interactions that look genuine. Fake owners register, fake usage patterns trigger journeys, and marketing ends up nurturing buyers of fakes.

Compare the three common carriers on what they do for interaction data.

Standard NFC (NTAG213 class) Secure NFC (NTAG 424 DNA class) Serialised printed QR
Authentication Static ID, can be cloned Signed code on every tap, via SUN messaging (AES-128) None by itself, serial can be copied
Standard ISO/IEC 14443-A ISO/IEC 14443-A, NFC Forum Type 4 GS1 Digital Link
Indicative cost About €0.19-0.23 at 1-10k units About $0.45-0.65 at five-figure volumes, on-metal +7-30% Near-zero marginal print cost
Best for Engagement where fraud risk is low Verified interactions and ownership Visible, compliance-facing access

Sources: public converter catalogues, 2026; industry sources, 2026. Above 50k units, secure tag pricing is quote-only.

A basic tag is like a door with the key hanging next to it. A secure tag generates a new one-time code each time someone approaches, and only the genuine chip can produce the right one. That is what keeps interactions from fakes out of the CRM.

On the QR row, the real cost is not the print. It is serialisation and the platform behind it.

Two physical constraints matter. Standard tags detune on metal, so on-metal tags with a ferrite layer are needed for caps, tins and watch cases. For opened status, tamper-evident variants such as the TagTamper version of the NTAG 424 DNA class report whether a closure has been broken.

When is a QR code the right choice?

A serialised QR wins in several cases. It fits very high volumes with low unit value, lines with no secondary market, and cost-constrained production. It also needs no chip, so any existing print process can carry it.

A visible carrier matters for compliance too. The ESPR (Regulation (EU) 2024/1781) is carrier-neutral, but GS1 Digital Link QR is emerging as the practical default for Digital Product Passports. A common approach is NFC for trust, visible carrier for compliance.

The trade-off is plain. A copyable QR can still feed an experience layer, but its events carry less certainty about the item. Where an owner profile, a warranty or a resale record depends on the event, a secure chip or a copy-resistant print gives a firmer base. NFC and QR compared for protection covers that choice in more depth.

Which product interactions matter most by sector?

Sector Most valuable interaction Journey it powers
Wine and spirits First tap and opened status Serving content, collector registration, refill fraud alerts
Beauty and fragrance Repeat taps and opened status Routines, replenishment, reorder
Luxury leather goods Ownership claim and transfer Care, repair, resale welcome
Watches Registration and service scans Warranty, service reminders, certified pre-owned
Fashion Care and passport scans Care guidance, repair, resale

What should flow from product events into the CRM?

The CRM is where journeys run. The identity platform is where product events live. Be deliberate about what crosses between them.

  • At registration: the registered owner and consented contact, which create or update the profile.
  • At registration or transfer: the items owned, which link profile to units.
  • When they change: attributes such as active, second owner or replenishment due.
  • Not at all, or only aggregated: anonymous product events. With no person attached, they belong in the product record.

The unit identifier is the join key. It is the same one that links products to ERP and PIM data, as described in connecting ERP, PIM and PLM data to product identities. Keep unit events and person profiles separate, or every scan becomes a false lead.

How do you measure the chain from scan to outcome?

Measure from tap to result. Each step has its own number, and the weakest one shows where to invest.

Step Metric
Coverage Share of units with a working identity (target 99%+)
Interaction Share of units tapped at least once after sale
Consent Share of tapping owners who register
Activation Share of registered owners in at least one triggered journey
Outcome Repeat purchase, service uptake, resale transfers, counterfeit cases resolved

Interaction rate and consent rate move most with experience design. A better reason to tap and a better reason to register usually do more than any change to the CRM.

40+ brands · 12 years · €1.5B protected

Brands that treat every tap as a decision input, not a count, build a customer record that retail data cannot supply. Selinko, part of Toppan, links verified product events to consented owners and CRM triggers through its customer engagement and data collection solution.

FAQs

What is product interaction data?

Product interaction data is the record of each moment someone reads a product’s digital identity, stored against that specific unit. It includes time, place, authenticity result and content viewed. It becomes personal data only when the owner opts in, for example by registering an ownership certificate.

How do you turn product scans into customer data?

Verify each scan against the unit, enrich it with model, batch and market, and ask for consent when the owner receives clear value. Then apply rules that convert event patterns into attributes, and let attribute changes start CRM journeys. Measure each journey back to the tap that began it.

When should brands ask for consent after a product scan?

Ask when the owner gets something concrete in return: a digital ownership certificate, an extended warranty, replenishment reminders or exclusive access. The first tap should work anonymously. Registration comes next, and marketing permission is a separate choice. In Europe, GDPR requires clear notice and a specific purpose.

Should every product scan go into the CRM?

No. Anonymous events have no person to attach to, so they belong in the product record, or reach the CRM only as aggregates. Send the registered owner, items owned and attribute changes. Keeping units and people separate stops every scan being treated as a lead.

How do you stop counterfeits polluting customer data?

Use carriers that cannot be copied. Secure NFC in the NTAG 424 DNA class produces a signed, fresh code on every tap through SUN messaging, so a cloned tag fails verification. Where a chip is uneconomic, copy-resistant print gives similar protection. Failed checks should route to brand protection, not marketing.

What journeys can product interactions trigger?

Common journeys include replenishment based on opened status and tap frequency, a welcome for second owners after a transfer, support after a failed verification, and service reminders from registration and service dates. Each reacts to what the owner does with the product, not to a campaign calendar.

How should product interaction programmes be measured?

Track five steps: coverage of units with a working identity, share of units tapped after sale, share of tapping owners who register, share of registered owners in a triggered journey, and business outcomes such as repeat purchase or resale transfers. The weakest step shows where to invest next.

Map your interactions

Blog

Discover more articles

All our articles